$0.185/min
+266 · 3 routes
Country code +681
Wallis and Futuna VoIP rates
Prepaid SIP termination to Wallis and Futuna from $0.185 per minute across 4 published prefix routes and 2 operator groups. Rates effective July 16, 2026.
Lowest fixed-line rate$0.185/min
Lowest mobile rate$0.185/min
Billing increment60/60
Rates effective2026-07-16
Increments in use on Wallis and Futuna: 60/60 (4 routes). Displayed values are source “from” rates; billing increments, traffic type, route availability, KYC and commercial margin all affect the final customer offer.
Operator breakdown
Wallis and Futuna routes by network
| Route | From | Up to | Increment | Prefixes | Example prefixes |
|---|---|---|---|---|---|
| Fixed | $0.185 | — | 60/60 | 1 | +681 |
| Mobile | $0.185 | — | 60/60 | 3 | +68150, +68168, +681728 |
Connecting
How to call Wallis and Futuna from your platform
Dial Wallis and Futuna numbers in E.164 format: country code +681 followed by the national number, with no local trunk prefix, spaces or brackets. Most platforms expect digits only; some require a leading plus. Confirm the exact dial pattern during testing.
CloudyVoice works with any SIP-capable endpoint — softphones, IP desk phones and ATAs, IP-PBX platforms such as Asterisk, FreeSWITCH and 3CX, call-centre dialers including ViciDial, and VOS softswitch deployments. Authentication is by SIP registration or approved IP address.
Before sending production traffic to Wallis and Futuna, test across several networks in the destination and check two-way audio, caller ID behaviour, post-dial delay, answer supervision and billing. The route-quality guide explains the method.
Questions
Frequently asked questions
How much does it cost to call Wallis and Futuna over VoIP?
CloudyVoice publishes Wallis and Futuna termination from $0.1853 per minute, with fixed-line routes from $0.1853 and mobile routes from $0.1853. These are source “from” rates across 4 prefix routes; final pricing depends on your traffic profile, volume and quality requirements.
What is the country dialling code for Wallis and Futuna?
Wallis and Futuna uses country code +681. Dial in E.164 format — the country code followed by the national number, without a local trunk prefix, spaces or brackets.
Why are mobile rates to Wallis and Futuna different from fixed-line rates?
Mobile termination in Wallis and Futuna carries a fee set by the receiving mobile operator, separate from the fixed-line network. That is why the cheapest mobile route here is $0.1853 while the cheapest fixed route is $0.1853. Each mobile operator range is priced individually, so the prefix you dial determines the rate.
What billing increment applies to Wallis and Futuna calls?
The most common increment on Wallis and Futuna routes is 60/60. Written as first/subsequent, 60/60 bills whole minutes, 60/1 bills the first minute in full then per second, and 1/1 bills per second throughout. On short calls the increment affects effective cost more than the headline rate.
Which devices can I use to call Wallis and Futuna?
Any SIP-capable endpoint: softphones such as Zoiper, MicroSIP or Linphone; SIP desk phones; analog phones behind an ATA; IP-PBX platforms including Asterisk, FreeSWITCH and 3CX; call-centre dialers such as ViciDial; and VOS softswitch deployments. Both username/password registration and IP authentication are supported.
Do I need an account to see Wallis and Futuna rates?
No. Every rate on this page is public. An account is needed only to send traffic, and outbound routes are enabled after traffic review confirms your destinations, expected volume and lawful use case.
Similar pricing
Related destinations
$0.188/min
+252 · 115 routes
$0.188/min
+979 · 1 routes
$0.189/min
+679 · 14 routes
$0.190/min
+673 · 5 routes
$0.190/min
+228 · 20 routes
Ready to call Wallis and Futuna?
Create an account, complete traffic review, and top up from $10. Every Wallis and Futuna rate above is published before you register.